You may have a damaged shoe sole or any other product that needs to be fixed with Masters Contact Cement. You do not know how to get the best results out of this adhesive.
No Worries! I will describe how to get maximum benefits from this product through a complete user guide. Additionally, I will share practical tips to make this cementing process super successful. You can read the details in the blog.
What is Masters Contact Cement?
The Masters Contact Cement Glue is a high-strength and flexible adhesive that provides long-lasting bonding for multiple materials such as leather, wood, plastics, and more.
It has neoprene rubber dissolved in a solvent like acetone or toluene. It is resistant to heat, moisture, and chemical exposures.
Material Requirement For Using Masters Contact Cement
Every adhesive needs supplies for its application. Similarly, the Masters Contact Cement also requires these Materials for its application:
1: Masters Contact Cement
2: Application Brush (New or Disposable)
3: Pressure(Clamps or roller)
4: Cleaning cloth
5: A Sandpaper
With these materials, you can make your cementing process smooth and easy. It will help you to get the best results from this adhesive.
A Complete User Guide to Get Best Results From Master Contact Cement
Professionally using Master Contact Cement can make a glaring difference in the final bonding results. Therefore, I have described here a step-by-step guide for your ease:
➜ Step 1: Make the Surface Ready
Start with preparing the product surface where you need to apply the glue. You can do it by removing all the dirt, dust, old adhesive, and other materials.
Note: Use a wet cloth for a leather or rubber material and sandpaper for wooden or shiny surfaces.
➜ Step 2: Apply Master Contact Cement
Next, spread a thin but even layer of Master Contact Cement on both surfaces. You can use fiber or a disposable or acid brush to save money.
Tip: Avoid applying a thick layer of cement. It will not increase the bonding strength. It will create a mess on the surface.
➜ Step 3: Allow the Glue to Dry
After that, leave the surface in the open air to dry for 5-10 minutes until it becomes tacky on feeling, but do not be wet.
Tip to Check the Surface Dryness
Touch the cemented surface with your finger. If it does not transfer the glue but sticks lightly, it is dry and ready to bond.
➜ Step 4: Press the Cemented Surfaces Together
Once both surfaces become tacky, align them from edge to edge and press together to avoid air bubbles. You can also use a clamp or roller for equal pressure distribution.
Note: Please do not slide or adjust both surfaces after pressing them together. The contact cement bonds instantly. So it can damage the surfaces.
➜ Step 5: Allow for Curing Time
Although the Master Contact Cement gives instant bonding, it definitely needs a curing time. You will leave the cemented item untouched for 24 hours to ensure its strength.
Tip:
Cure the product in a warm and dry place to speed up the process. By following this guide, you can get the best results from Master Contact Cement. It can make your broken product worth it again.
Also Read this Blog: Masters Contact Cement vs. Super Glue – Which One is Stronger
Tips for Professional Bonding of Masters Contact Cement
If you want to have the best repair of your product with a premium finish, then do not forget to follow these practical tips:
◈ Work in an Open Area: Always work in an open area to ensure air circulation for dryness and curing of contact cement.
◈ Have a Dedicated Brush: Use a new or disposable brush for contact cement spreading. Do not use a brush that has already been applied adhesive. It can mess up the spread of a new layer.
◈ Test Cement Before Use: Test the Contact Cement on a scarp material before applying it to your final product. It will help you to analyze the strength of the adhesive and its possible reaction to your material surface.
◈ Remove Excessive Cement: If the Contact Cement Spills out from the material surface, wait until it turns into a rubber-like shape. Then, gently peel it out with a fine hand-cutter or a knife.
Conclusion
Using Masters Contact Cement accurately can give you the best out of this adhesive product. Following this step-by-step guide, you can get long-lasting bonding with a professional finish through the Do-it-Yourself (DIY) approach.
Moreover, executing these practical tips will further increase the chances of your bonding task. Apply the essential information in this blog post and share your experience in the comment section!
Frequently Asked Questions
Q1: What is the best Contact Cement for shoe repairs?
The Masters Contact Cement is the best adhesive for shoe repair.
Q2: How long does Masters Contact Cement take to cure fully?
It will take around 24 hours to cure after application and dryness fully.
Q3: What is the drawback of Masters Contact Cement?
You can not re-adjust surfaces after their application. So, you have to be careful with its application.
Q4: What is better than Contact Cement?
Rubber cement is better than contact cement. You can easily clean up its spills.
Q5: How many coats of Contact Cement are needed?
Usually, two coats are enough, but the number varies with the depth of damage on the surface.
